4 ft fence
Privacy: Low
- Garden and dog-run sections
Fence materials by style
The most affordable perimeter fencing for backyards, pets, and security — galvanized or vinyl-coated with optional privacy slats.
Typical installed range $2,400–$3,500 $15–$22 per linear ft · 6 ft galvanized
Mesh gauge, coating, and privacy slats change cost and appearance.
Enter length, coating style, mesh gauge, and city.
Based on your selections above.
Cost also varies based on
Installed cost per linear foot at 6 ft.
| Gauge | Cost (installed) | Lifespan | Best for |
|---|
Chain link excels when budget and function matter more than aesthetics.
Privacy: Low
Privacy: Moderate
Privacy: Moderate with slats
Coating affects appearance and rust resistance.
Based on the city selected in the calculator above.
Corner and end posts are larger — more concrete than line posts.
Weaving slats adds material and labor — can add 30%+ to base cost.
Commercial specs increase hardware cost.
Driving posts in rock slows installation.
Based on the city selected in the calculator above.
6 ft galvanized · 150 linear ft
6 ft galvanized · 150 linear ft
Prices on this page adjust for Wilmington-area labor, permits, and climate — not a generic national template.
Wilmington contractors specialize in coastal humidity, hurricane-rated roofing, and moisture-resistant remodels. Cape Fear region labor runs slightly above inland NC due to salt-air material requirements and storm-code compliance.
Contractor labor runs about 4% below the U.S. average; typical permit fees in our model start around $245 for standard residential work.
City of Wilmington Planning & Development and New Hanover County issue permits. Coastal wind and flood requirements add documentation vs. inland NC.
Coastal NC humidity and hurricane exposure:
Chain link typically costs $15–$28 per linear foot installed. Privacy slats increase the total.
Yes — chain link is usually the lowest-cost installed residential fence type.
Galvanized mesh often lasts 15–20 years; vinyl-coated can reach 20–25 years.
Full calculator with chain link pre-selected.