Updated May 2026 · National averages
Estimate your fence installation cost instantly. National averages range from $2,500–$12,000 for a typical backyard project depending on linear footage, material, height, gates, and location.
Enter fence length, material, and city for a localized estimate — no signup required.
Adjust fence length, material, height, gates, terrain, and location for a detailed breakdown with financing estimate.
Installed national averages for 150 linear ft, 6 ft height, one gate, flat terrain (2026)
| Material | 150 ft range | Per linear ft | Lifespan | Best for |
|---|---|---|---|---|
| Chain link | $2,400 – $3,500 | $16 – $23 | 15–25 years | Pets, security, budget projects |
| Wood privacy | $3,800 – $5,500 | $25 – $37 | 15–20 years | Backyard privacy, classic look |
| Vinyl | $4,200 – $6,200 | $28 – $41 | 20–30 years | Low maintenance, clean appearance |
| Aluminum | $4,500 – $6,800 | $30 – $45 | 25+ years | Pool codes, decorative panels |
| Composite | $5,000 – $7,500 | $33 – $50 | 25–30 years | Wood look without staining |
Explore cost guides for popular fencing types — each with installed ranges and regional factors
Cedar & pressure-treated · 15–20 yr lifespan
$3,800 – $5,500
View cost guide →Privacy & picket styles · 20–30 yrs
$4,200 – $6,200
View cost guide →Wood-grain boards · 25–30 yrs
$5,000 – $7,500
View cost guide →Galvanized & vinyl-coated · 15–25 yrs
$2,400 – $3,500
View cost guide →Ornamental & pool-rated · 25+ yrs
$4,500 – $6,800
View cost guide →Side-by-side cost & maintenance comparison
Compare options
Read comparison →Labor rates, permit rules, and soil conditions drive price differences across the U.S.
Labor typically accounts for 45–55% of your total fence installation bill. Rates depend on crew size, post depth, terrain, and local demand.
| Region | Labor / linear ft | 150 ft labor |
|---|---|---|
| National | $12 – $22 | $1,800 – $3,300 |
| Texas | $11 – $18 | $1,650 – $2,700 |
| Florida | $13 – $21 | $1,950 – $3,150 |
| California | $16 – $26 | $2,400 – $3,900 |
| Northeast | $15 – $24 | $2,250 – $3,600 |
Many municipalities require a permit for new fences — especially over 6 ft. HOAs often dictate style, height, and color before you break ground.
Always verify your contractor pulls the correct permit. Unpermitted fences can trigger fines and complicate home sales.
| City | Permit cost | Notes |
|---|---|---|
| Dallas, TX | $75 – $150 | Online application |
| Houston, TX | $100 – $175 | Varies by district |
| Miami, FL | $125 – $225 | Pool barrier rules |
| Phoenix, AZ | $80 – $140 | Height limits by zone |
| Los Angeles, CA | $150 – $300+ | Corner visibility rules |
Compare typical costs and when each option makes financial sense
| Factor | Fence repair | New installation |
|---|---|---|
| Typical cost | $150 – $800 per section | $2,500 – $12,000 national |
| Best when | Localized damage, fence under 10 years | 15+ years old, rot, leaning posts, style change |
| Timeline | Same day – 2 days | 1–5 days depending on length |
| Permits | Often not required for minor repair | Required in many cities for new fence |
| Warranty | Limited to repaired area | Full install warranty 1–5 years typical |
| Break-even | Repairs over $1,500 → consider replace | Long-term value if staying 5+ years |
Not sure? Use the calculator or read our fence installation cost guide.
Transparent pricing
Estimates combine national installed-cost benchmarks with metro-specific labor, material, and permit multipliers drawn from BLS wage data, EIA utility rates, NREL solar benchmarks, and RSMeans-style unit costs. City and state pages use the same formulas as our live calculators.
Prices on this page adjust for Jacksonville-area labor, permits, and climate — not a generic national template.
Jacksonville offers Florida's best labor value among major metros. Large suburban housing stock built in the 1980s–2000s creates steady roofing, HVAC, and fencing demand without Miami-level premiums.
Contractor labor runs about 5% below the U.S. average; typical permit fees in our model start around $265 for standard residential work.
City of Jacksonville Building Inspection Division handles most permits. St. Johns and Clay counties have separate offices for suburban projects.
North Florida humidity with coastal storm exposure:
Answers to the most-searched questions about fence installation pricing in 2026
The national average fence installation cost in 2026 is $2,500–$12,000 for a typical residential project, or roughly $18–$42 per linear foot installed. Most homeowners pay around $4,800 for 150 linear feet of 6 ft wood privacy fencing including one gate and permit.
Installed costs run about $16–$23 per linear foot for chain link, $25–$37 for wood privacy, $28–$41 for vinyl, $30–$45 for aluminum, and $33–$50 for composite nationally. Height, gates, and terrain change the total — use our advanced calculator to model your yard.
Many cities require a permit for new fences — especially 6 ft or taller. Fees average $100–$200 nationally. HOAs may require separate approval. Our calculator includes a permit line item you can compare by state and ZIP.
Online calculators provide a useful budget range within about 10–15% of final bids when you enter accurate linear footage, material, and height. Rock, old fence removal, and custom gates can push the final number higher — always get 3–5 on-site estimates.
Chain link is the most affordable installed option at roughly $16–$23 per linear foot. Wood privacy offers a classic look at $25–$37 per linear foot. See our vinyl vs. wood comparison for maintenance trade-offs.
A single walk gate typically adds $300–$500 installed nationally. Double drive gates cost more. Toggle gate count in the advanced calculator to see the impact on your estimate.